If you’re looking for headphones that will work with your iPhone, you need to get a pair of Apple EarPods Headphones with Lightning Connector. These headphones are designed to give you the best possible sound quality while still being comfortable to wear. Plus, they come with a built-in microphone so you can take hands-free calls.
These are not your average earbuds! Gone are the days when people used to use headphones that only had one cord attached, with each earphone having its own small piece of plastic or rubber plug to stick in their other ear.
These new ones Apple EarPods Headphones have a very long cable that connects directly to your smartphone or tablet. You can now listen to music and do things like make calls, take pictures, and watch videos while you’re away from your device!
There is a downside to this, however. The headphone cords get tangled up easily, so it can be tricky to find your phone or device at times. It also takes longer to disconnect them if you want to go somewhere without listening to music or doing something else for a few minutes.
If you ever lose track of your phone or device, these could prove quite frustrating to pull out as they may get stuck inside someone’s pocket or bag.
Lightning is a digital protocol for charging devices
A quick reminder: The older standard headphone jack used to connect headphones has two connections, one for each earpiece. That connector typically connects using a small plastic plug that fits into your smartphone’s headphone port.
The other common type of headphone connection uses an old-fashioned cable that plugs into the device at one end and another larger plug you put in either your computer or bedroom stereo system at the other.
Both types of connectors are analog — which means they transmit electrical signals but not necessarily information about what music program is being listened to or whether there is noise coming from the environment.
That’s why people often get stuck with poor sound quality when using headphones with their phone or computer.
With Bluetooth technology, though, newer phones have incorporated it as an option. You can take out your own pair of Bluetooth headphones and use them instead of regular ones, which cuts down on this problem slightly.
But still, if you want great quality audio, you’re limited to only having wired headphones unless you invest in expensive specialised wireless headphones.
And while some companies have made really cleverly designed headphones with touch sensitive controls for volume and playback, none feature lightning connectors!
Which is a shame because we all have access to lots of lightning adapters these days, and many people already have a few around the house.
The headphones use a new charging case
What is it? An adapter that connects to your smartphone or computer via USB and then re-charges the earbuds you attach to them!
The Monster Cable VGA HD 5V to 1 Amp Adapter does this, making it possible to fully recharge both sets of earbuds simultaneously. This is very helpful as most smartphones these days have at least one more set of earbuds with spare batteries.
This also helps prevent people form borrowing/losing your bateries, as they would have to remove their own earbud charger first before being able to take away yours.
The headphones have a new design
What is it? An earphone with a built-in microphone! This allows for some pretty cool features such as voice activated Siri, phone calls via your smartphone, and more. You can also use them to make hands free calls by holding down the button on the side of the headphone.
These are called “active noise cancelling” Apple EarPods headphones because they actively work to reduce outside sounds while still allowing you to listen to what you want. This is very helpful if you like listening to music or podcasts in silence so that you do not drown out other noises around you.
The cost difference between active noise canceling Apple EarPods headphones and normal ones is usually about $20-30 up towards the expensive end. These one touch sync technology enabled ones are even easier to use than the older model headphones since you don’t need to press anything to use them.
This article will discuss some brands of active noise cancelling headphones and whether they are worth the extra money.
How to take good photos of your headphones
When taking pictures of your earbuds, make sure they are not in direct sunlight. The lightning connector for the headphone jack can sometimes cause a glare when exposed to light, making it hard to see the port.
To avoid this, put them away from bright sources of light!
You may also want to use a small flashlight if you cannot find the charger cable at home. There is usually an additional source of light with those too!
If you need to take a break during a listening session, remove the buds so that you do not have to hold them up while switching off the device or powering down.
Is the headphone cord safe?
When earbuds with a standard 3.5 mm audio plug get lost, people often find it hard to believe that someone could have damaged them by putting too much stress on them or pulling too hard.
The headphones in question usually contain an extra length of cable attached to one set of earbuds. This additional wire is what connects the device to your phone or computer via USB or Bluetooth.
This extended connection makes it easy to keep listening while you are done with whatever you were doing before, but also creates a risk if the person who has found the headphones loses track of them.
If they pull out just enough to make a sound, then they may discover that there’s no longer a connection to their mobile device.
This can be very frustrating as you may need the headphones for work or to listen to something else at home, but it can also mean losing all music and apps connected to the device.
It is important to know whether or not the headphones have expired so that you do not use them accidentally.
How to repair your headphones
If you are ever in need of help with your earbuds or headphone, do not worry! There are many ways to fix them so that they work again. Most of these repairs can be done at home by someone who knows how to do it.
There are several sites online that offer tips on how to fix different types of headphones. Some of the more common fixes include cleaning the cords, replacing broken parts, and using new cables.
By knowing some basics about headphones, you will know what part to look for when trying to diagnose which cord needs to be replaced.
How to replace the battery
For those who have experienced ear pain due to a dead phone, or poor sound quality due to bad headphones, then there is some good news! You can easily fix both of these by replacing the earphone’s batteries.
A standard headphone battery will last around 6-8 hours depending on how much you use them. Make sure to always have an extra set with you so that you are never left without music!
If your headphones no longer work after using them for several hours, then they may be damaged beyond repair. It is best to look online if anyone has tips on how to do this as some sites contain expensive equipment.
Can you use the headphones without the charging case?
One of the biggest criticisms of these earbuds is that you cannot use them as regular, listening-only earphones. You need to have the companion case to be able to play back music or watch videos.
You get two small buttons at the top of each earphone where you can access some settings and control volume, but beyond that, you’re out of luck.
If you just want to listen to something for a few minutes, this isn’t a problem unless you plan on taking the headphones with you. They won’t work if they run out of power either; you will need to bring your charger.
Since most people probably don’t, it is a significant drawback of the product.
1 thought on “Buy Best Apple EarPods Headphones With Lightning Connector”